Payment & Shipping Terms:
|Item:||Laser Marking System||Laser Original:||Germany Or China|
|Engraving Speed:||8000mm/s-15000mm/s||Graphic Format Supported:||BMP, DST, DWG, DXF, DXP, PLT|
|Applicable Material:||Acrylic, Crytal, Glass, Leather, MDF, Paper, Plastic, Plexiglax, Plywood, Rubber, Stone, Wood||Laser Marking Depth:||0.01-4mm|
|Standard Working Area:||110*110mm,175*175mm, 200*200mm,300*300mm||Laser Brand:||MAX,Raycus ,IPG,JPT,JPT MOPA|
20 W 30 W 50 W Tabletop Rotary Metal Laser Marking Machine For Knives Marking
Rotary Metal Laser marking Machine Introduce
Fiber Laser Marking Machine adopts international most advanced technology and the laser source is fiber with Germany IPG technology, lifetime can reach 100,000 hours, 8-10 years without any consumables and maintenance.
This is the best choice for the customers who have special requirements to the smallest & finest laser beam and character
Laser Industrial Marking System Specification
|Fiber laser source Series:||Pulsed, High Energy Ytterbium Fiber Lasers|
|Mode of operation||Pulsed|
|Central emission wavelength:||1060-1070 nm ,Q-switched operation Output power|
|adjustment range 10%-100%|
|Emission Bandwidth (FWHM)||<10 nm|
|Long-term average power instability||<5%|
|Pulse width, (FWHM)||100 ns|
|Laser switching ON time||180 μsec|
|Laser switching OFF time||180 μsec|
|Pulse Repetition Rate* kHz||20-80 kHz|
|Energy per pulse (PRR = 20 kHz)||0.95 mJ|
|Typical beam quality, M2||<1.8|
|Output fiber delivery length||3m|
|Max. Power consumption:||600W|
|Marking size:||110mm×110mm (F-theta 160)|
|Spot size:||≤ 40 micron (F-theta 160)|
|Cooling unit:||Air cooled|
|Pilot laser:||650nm diode laser, visible red light for marking guide|
|Continuous working time:||≥16h|
|Humidity:||45~85% (no condensation)|
|Control units||Laser Mark (English Version)|
Fiber laser marking machine Advantages
1.Best Marking Effect: the laser beam of fiber laser is fine and thin. It can provide the best
marking effect among all the laser machine machines. Especially good in smallest character
marking, such as mark on IC chip.
2.Deep Marking: Fiber laser can make deep marking up to 1.0mm on stainless steel and
aluminum. While YAG and Diode marking only could mark 0.2mm-0.3mm.
So it’s suitable for the industries which has high requirement to the depth and accuracy.
3.Higher Accuracy: fiber laser can reach up to 0.001mm precision, while diode only 0.01mm.
4.10 Years Long lifetime: We used the fiber laser module made by Germany IPG technology,
the lifetime of the fiber laser device is 10 thousand hours, so the machine can be used for
8-10 years. As for diode laser module is 2 thousand to 3 thousand hours and only can
be used for 1-3 years.
5.No consumables: Fiber laser machine can be used for 8-10 years with any consumables.
6.No need to adjust the laser path: fiber laser beam comes out from the fiber device directly,
so no need to adjust the laser optical path. While Diode laser need to adjust the laser optical
7.Free of Maintenance: Fiber laser machine can be used free of maintenance. Diode laser
need to change the diode module and recycle water regularly.
8.Use Integrated Air Cooling: Fiber laser uses integrated air cooling, and the cooling effect
is excellent than the water cooling used in Diode and YAG laser. Also, air cooling no need to
maintain, save many cost and energy.
9.Low Power Consumption: low cost, only 0.5kw/hour. While Diode is 3kw/hour, and YAG
is 5 kw/hour. Fiber laser is more economized and environmental.
10.Small and compact: the volume of fiber laser marking machine is small, only 0.5 M2.
It can be put in desk and easy to install.
wood craft fiber laser marking machine Application Scope and Material
1.Electronic and communication products, IC products, electric lines, cable computer components and electric appliance.
2.Every kind of precision parts,hardware tools,instrument appliance,aviation and spaceflight appliance.
3.Jewelry, garments, instruments, gifts, office devices, brand scutcheon, sanitary ware appliance.
4.Dishware ,food ,drinking,smoking and alcohol,etc.
Etching Marking Machine FAQ
Q: What’s the package of wood craft fiber laser marking machine ?
A: We have 3 layers package. For the outside, we adopt wood craft case. In the middle, the machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by thickening plastic bag for waterproof.
Q: Will the wood craft fiber laser marking machine package damaged during transportation?
A: Our package is considerate all the damage factors and make it to be safe, and our shipping agent have full experienced in safe transportation. We have exported to 180 countries worldwide. So please don’t worry, you will receive the parcel in good condition.
Q: How to install and run the wood craft fiber laser marking machine ?
A: Our technician have installed the machine before shipping. For some small parts installation, we will send detail training video, user’s manual along with the machine. 95% customers can learn by themselves.
Q: How can I do if the wood craft fiber laser marking machine goes wrong?
A: If confronted with such problems, please contact us asap and do not try fix the machine by yourself or someone else. We will response within 24 hours as quick as we can to solve it for you.
Metal Laser Etching Machine Production Plant